We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Name
R422001054 (CCI-DA-025-0030-00412241100002) AVENTICS - Kompaktzylinder ISO 21287, Serie CCI
Part number
R422001054
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R422001054 (CCI-DA-025-0030-00412241100002) AVENTICS - Kompaktzylinder ISO 21287, Serie CCI R422001054, connect FAMAGA, the world's dominant retailer of mechanized equipment. Our company has operated for more than ten years - these are cycles of experience, which are illustrated in the quality of products and individual attention to each consumer. We value everyone, who engaged with us - thus, our regular clients pick up the most favorable purchase forms and discounts on the factory-made equipment market. Nowadays, there are more than 3500 such consumers, and we constantly compose new agreements. More than 700 transactions are made per day, because FAMAGA operates all over the planet Germany, United Kingdom, Eswatini, Cuba, Italy, South Sudan, Estonia, Guyana, Burkina Faso, China, Swaziland, Mozambique, Fiji, Switzerland, Nepal, Saudi Arabia, Honduras, Suriname, Indonesia, United Arab Emirates, Mali, Kuwait, Syria, Egypt, Dominica, Brunei, Qatar, Norway, Costa Rica, Sweden, Antigua and Barbuda, Zimbabwe, Argentina, Comoros, Pakistan, Kazakhstan, Peru, El Salvador, Tajikistan, Belize, Jamaica, Ireland, Bolivia, India, Seychelles, Kiribati, Panama, Cape Verde. A well-elaborated logistics network and a partnership network allow us to conduct our goods anywhere in the world promptly without compromising product quality.
A particular source of dignity for FAMAGA is its team members, each of whom contributes to our work. We request into our team only professionals, who already have experience in the field of manufacturing equipment.
All merchandises from FAMAGA are verified - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been supplied, and this number is increasing every day. We are happy that clients choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as stay in control.
To request or place an order, phone us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Scraper | Polyurethane |