We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822490202
Description
Piston rod modification | Optionally through (hollow) |
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M8 |
Standardization | NFE 49004 |
Stroke | 15 mm |
Sealing material | Nitrile butadiene rubber |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822490202, contact FAMAGA, the world's key producer of streamlined equipment. Our company has lasted for more than ten years - these are cycles of experience, which are described in the quality of products and individual attention to each consumer. We respect everyone, who worked with us - therefore, our regular customers obtain the most favorable purchase conditions and discounts on the machine made streamlined equipment market. At this time, there are more than 4000 such customers, and we constantly compose new agreements. More than 650 purchases are terminated per day, because FAMAGA delivers all over the world Germany, United Kingdom, Swaziland, Jordan, Zambia, Lithuania, Australia, Singapore, Saudi Arabia, Ukraine, Burkina Faso, Austria, Suriname, Angola, Iceland, Lebanon, Andorra, North Korea, Belize, Romania, Nigeria, Moldova, Eswatini, Rwanda, Ecuador, Sudan, Iraq, Switzerland, Cameroon, Slovakia, Mali, Thailand, Malaysia, Azerbaijan, Armenia, Togo, Uganda, Syria, Kiribati, Antigua and Barbuda, Tanzania, Afghanistan, Brazil, Czech Republic, Tunisia, Senegal, Montenegro, Mauritius. A advanced logistics chains and a partnership network let us to conduct our elements anywhere in the globe promptly without undermining product quality.
A particular source of good name for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the field of factory-made equipment.
All goods from FAMAGA are ensured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that purchasers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To consult or place an order, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |