We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822245410
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 100 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 500 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822245410, reach FAMAGA, the world's major company of industrialized equipment. Our company has functioned for more than ten years - these are years of experience, which are depicted in the quality of spare parts and private attention to each customer. We cherish everyone, who liased with us - therefore, our regular purchasers procure the most flexible purchase forms and discounts on the machine made streamlined equipment market. At present, there are more than 3500 such purchasers, and we constantly arrange new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Zambia, South Sudan, South Africa, Lesotho, Malta, Brazil, Algeria, Guyana, Uruguay, Djibouti, Tunisia, Thailand, Bhutan, Slovenia, Costa Rica, Sudan, United States, Morocco, Mongolia, Chile, Azerbaijan, Andorra, Saudi Arabia, Netherlands, Zimbabwe, Senegal, Gambia, Laos, Yemen, Austria, Angola, Iraq, Belize, Switzerland, Syria, India, Cameroon, Ukraine, Brunei, Israel, Montenegro, Eswatini, Uganda, Central African Republic, Tonga. A well-elaborated logistics link and a partnership network allow us to ship our goods anywhere in the globe immediately without compromising product quality.
A special source of pride for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only professionals, who already have experience in the direction of factory-made equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are pleased that users choose FAMAGA again and again, and we strive to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To inquire or make a request, contact us or write to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |