We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226612500
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 12 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 250 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 5226612500, communicate with FAMAGA, the world's key provider of mechanized equipment. Our company has operated for more than ten years - these are cycles of experience, which are depicted in the quality of products and individual attention to each consumer. We admire everyone, who engaged with us - therefore, our regular buyers obtain the most helpful purchase forms and discounts on the industrial equipment market. Now, there are more than 4000 such customers, and we constantly sign new agreements. More than 650 agreements are achieved per day, because FAMAGA supplies all over the world Germany, United Kingdom, East Timor, Eswatini, Kiribati, Cambodia, The Gambia, Oman, Sweden, Botswana, Congo, Bosnia and Herzegovina, Samoa, Bulgaria, Israel, Andorra, Antigua and Barbuda, Albania, Macedonia, Bangladesh, Chad, Jordan, Libya, Kuwait, Namibia, Chile, United Arab Emirates, North Korea, Rwanda, Haiti, Australia, Equatorial Guinea, Malta, Senegal, Thailand, Tanzania, Russia, Denmark, Austria, Niger, Mexico, Tonga, Suriname, New Zealand, Croatia. A well-developed logistics network and a partnership network allow us to send our units anywhere in the earth immediately without discrediting product quality.
A specific source of pride for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only experts, who already have experience in the direction of industrial equipment.
All items from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is increasing every day. We are proud that buyers choose FAMAGA again and again, and we strive to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To inquire or make a request, call us by phone or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |