We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822433204
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Standardization | ISO 6432 |
Stroke | 40 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822433204, get in touch with FAMAGA, the world's influential distributor of streamlined equipment. Our company has advanced for more than ten years - these are years of experience, which are expressed in the quality of goods and particular attention to each purchaser. We value everyone, who conspired with us - thus, our regular buyers procure the most desirable purchase forms and discounts on the industrial equipment market. Now, there are more than 4 thousand such purchasers, and we constantly sign new agreements. More than 650 transactions are made per day, because FAMAGA delivers all over the world Germany, United Kingdom, Tajikistan, Macedonia, Mongolia, Myanmar, Malaysia, Japan, Costa Rica, Egypt, Lebanon, Ireland, Australia, Paraguay, Kenya, Tonga, Benin, Iceland, Sierra Leone, North Korea, Montenegro, Dominica, Slovakia, Czech Republic, Gambia, Djibouti, Tanzania, Austria, Bangladesh, Liechtenstein, Eswatini, New Zealand, Central African Republic, Kiribati, Jamaica, Ukraine, Senegal, Rwanda, Brunei, Norway, Mauritius, Sudan, United Arab Emirates. A well-built logistics series and a partnership network let us to send our goods anywhere in the globe promptly without discrediting product quality.
A specific source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are verified - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is amounting every day. We are proud that buyers choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To get some advice or book, call us by phone or send a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |