We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480177259
Description
Functional principle | double-acting |
Cushioning | pneumatically |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | 3/4-16 UNF |
Stroke | 177.8 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | 1/2 NPT |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R480177259, call FAMAGA, the world's chief producer of industrial equipment. Our company has existed for more than ten years - these are cycles of experience, which are expressed in the quality of merchandises and individual attention to each buyer. We value everyone, who liased with us - thus, our regular clients receive the most attractive purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such buyers, and we constantly make new agreements. More than 700 agreements are achieved per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Cyprus, Syria, Chad, Sudan, Guinea-Bissau, Bulgaria, Malaysia, Guatemala, Panama, Swaziland, Congo, Suriname, Seychelles, Vietnam, Libya, Kiribati, Madagascar, Montenegro, Mexico, South Korea, Georgia, China, The Gambia, Ukraine, Cape Verde, Qatar, Rwanda, Uzbekistan, Monaco, Pakistan, Finland, Uganda, Kuwait, Tonga, Nicaragua, Switzerland, Mauritius, Azerbaijan, Benin, Armenia, Cameroon, Zimbabwe, United Arab Emirates, Afghanistan, United States, Egypt, Iran. A well-developed logistics series and a partnership network allow us to deliver our products anywhere in the planet as soon as possible without undermining product quality.
A particular source of repute for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All goods from FAMAGA are ensured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that buyers choose FAMAGA again and again, and we are happy to make more exceptional and technologically advanced industrial equipment so as keep on top of it.
To request or place an order, call us by phone or write to the online chat on our official website. You can also direct a list of the necessary equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |