We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480177246
Description
Functional principle | double-acting |
Cushioning | pneumatically |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | 3/4-16 UNF |
Stroke | 152.4 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | 1/2 NPT |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480177246, make contact with FAMAGA, the world's major vendor of manufacturing equipment. Our company has worked for more than ten years - these are cycles of experience, which are expressed in the quality of merchandises and particular attention to each consumer. We praise everyone, who liased with us - thus, our regular purchasers get the most attractive purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such consumers, and we constantly form new agreements. More than 700 agreements are achieved per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Fiji, Canada, Lesotho, Colombia, Djibouti, Afghanistan, Iceland, Haiti, Netherlands, Papua New Guinea, Brazil, Pakistan, Egypt, Tajikistan, Algeria, Dominica, Mongolia, Suriname, Uruguay, Albania, Paraguay, Guatemala, Zimbabwe, East Timor, Estonia, Cape Verde, New Zealand, Nepal, Kenya, Cyprus, Burkina Faso, Finland, Austria, Serbia, Botswana, Costa Rica, Kuwait, El Salvador, South Korea, Ireland, Ghana, Bolivia, The Gambia, Croatia, Lithuania. A advanced logistics link and a partnership network allow us to conduct our items anywhere in the world as soon as possible without damaging product quality.
A particular source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only professionals, who already have experience in the range of industrial equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that consumers choose FAMAGA again and again, and we strive to make more exceptional and technologically advanced industrial equipment so as keep on top of it.
To get some advice or place an order, call us by phone or write to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |