We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472014002
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M20x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 75 mm |
Sealing material | Polyurethane |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 7472014002, get in touch with FAMAGA, the world's the best retailer of mechanized equipment. Our company has progressed for more than ten years - these are ages of experience, which are represented in the quality of spare parts and particular attention to each customer. We respect everyone, who conspired with us - therefore, our regular buyers pick up the most convenient purchase terms and discounts on the machine made streamlined equipment market. Now, there are more than 4000 such buyers, and we constantly sign new agreements. More than 650 contracts are concluded per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Colombia, Central African Republic, Switzerland, Mexico, Moldova, Lithuania, Romania, Djibouti, Angola, Suriname, Serbia, Finland, Uganda, Kyrgyzstan, Eritrea, The Bahamas, Swaziland, Azerbaijan, Nicaragua, Afghanistan, Yemen, Russia, Denmark, Georgia, Burkina Faso, El Salvador, The Gambia, Czech Republic, Comoros, North Korea, Philippines, Belarus, Pakistan, Senegal, United States, Mozambique, Qatar, Antigua and Barbuda, Luxembourg, Haiti, East Timor, United Arab Emirates, Brunei, Poland, Madagascar, Croatia. A well-shaped logistics series and a partnership network let us to ship our products anywhere in the globe with no delay without damaging product quality.
A specific source of honor for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the field of machine made streamlined equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been provided, and this number is rising every day. We are pleased that consumers choose FAMAGA again and again, and we strive to make more exceptional and technologically advanced industrial equipment so as not to lower the bar.
To ask a question or book, call us by phone or send a message to the online chat on our official website. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |