We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7471323565
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 63 mm |
Piston rod thread | M20x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 100 mm |
Sealing material | Polyurethane |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 7471323565, reach FAMAGA, the world's foremost retailer of machine made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are represented in the quality of outcomes and private attention to each client. We admire everyone, who engaged with us - hence, our regular buyers obtain the most attractive purchase conditions and discounts on the factory-made equipment market. At this moment, there are more than 4 thousand such purchasers, and we constantly compose new agreements. More than 750 agreements are achieved per day, because FAMAGA operates all over the planet Germany, United Kingdom, Norway, Spain, Philippines, Georgia, Ukraine, Tunisia, El Salvador, Eritrea, Chile, Sweden, Suriname, Colombia, Chad, New Zealand, Switzerland, Liberia, Mongolia, Laos, Turkmenistan, Macedonia, North Korea, Kazakhstan, Lithuania, Latvia, Algeria, Uganda, Armenia, Iceland, Haiti, Uzbekistan, Belarus, Czech Republic, Qatar, Denmark, Austria, Rwanda, Zimbabwe, Bulgaria, Equatorial Guinea, Benin, Argentina, Thailand, Greece, Luxembourg, Brazil, Bangladesh. A advanced logistics system and a partnership network allow us to deliver our products anywhere in the world with no delay without discrediting product quality.
A specific source of honor for FAMAGA is its workers, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the direction of industrial equipment.
All merchandises from FAMAGA are assured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been provided, and this amount is ascending every day. We are happy that buyers choose FAMAGA again and again, and we are pleased to make more progressive and technologically innovative industrial equipment so as not to lower the bar.
To ask a question or make a request, phone us or write to the online chat on our site. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Optional heat-resistant variants are suitable for applications at temperatures up to 120 °C and do not have a magnetic piston. You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |