We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R414000778
Description
| Housing | Die-cast aluminum,Steel |
| Sealing material | Hydrogenated acrylonitrile butadiene rubber |
| CE declaration of conformity | |
| Protection class | IP65 |
| Number of wires | 5-pin |
| Port size | M12 |
| Type | Plug |
| Nominal flow Qn | 1300 l/min |
| Hysteresis | 0.04 bar |
| DC operating voltage | 24 V |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are pursuing Aventics (brand of Emerson) R414000778, get in touch with FAMAGA, the world's top provider of industrialized equipment. Our company has lasted for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and individual attention to each buyer. We value everyone, who liased with us - hence, our regular customers procure the most flexible purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 3500 such consumers, and we constantly form new agreements. More than 650 transactions are made per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Côte d\'Ivoire, Turkey, Madagascar, Bangladesh, Macedonia, Australia, Lesotho, Uganda, Syria, Congo, Kuwait, Tanzania, Niger, Malta, Rwanda, Malawi, Suriname, Denmark, Armenia, Botswana, Angola, Chad, Laos, Mongolia, Haiti, Gambia, Burkina Faso, Kazakhstan, Djibouti, Zambia, Nicaragua, Israel, Chile, Zimbabwe, Thailand, Russia, Libya, Comoros, Burundi, Brunei, Iran, United Arab Emirates, Uruguay, Nepal, Tunisia, Egypt. A well-shaped logistics link and a partnership network cheer us to deliver our goods anywhere in the globe as soon as possible without damaging product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to our work. We call into our team only professionals, who already have experience in the range of manufacturing equipment.
All items from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are happy that clients choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To inquire or book, phone us or write a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
| Version | Poppet valve |
| Mounting orientation | α = 0 ... 90° ±β = 0 ... 90° |
| Certificates | CE declaration of conformity |
| Working pressure max | See table |
| Ambient temperature min./max. | 5 ... 50 °C |
| Medium temperature min./max. | 5 ... 50 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 1 mg/m³ |
| Nominal flow Qn | 1300 l/min |
| Control | Analog |
| DC operating voltage | 24 V |
| Voltage tolerance DC | -20% / +30% |
| Permissible ripple | 5% |
| Max. power consumption | 1400 mA |
| Protection class | IP65 |
| Weight | 2,05 kg |
| Nominal flow Qn with working pressure 7 bar , with secondary pressure 6 bar and Δp = 0.2 bar |
| The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| With oil-free, dry air, other installation positions are possible on request. The protection class is only ensured when the plug is mounted properly. For detailed information, see operating instructions. Minimum working pressure = 0.5 bar + max. required secondary pressure Additional pressure setting ranges available on request |
| Material |
|---|
| Housing | Die-cast aluminum Steel |
| Seals | Hydrogenated acrylonitrile butadiene rubber |
