We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5610264230
Description
Housing | Die-cast aluminum,Steel |
Sealing material | Hydrogenated acrylonitrile butadiene rubber |
CE declaration of conformity | |
Protection class | IP65 |
Number of wires | 5-pin |
Port size | M12 |
Type | Plug |
Nominal flow Qn | 1300 l/min |
Hysteresis | < 0.09 bar |
DC operating voltage | 24 V |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 5610264230, catch up with FAMAGA, the world's key distributor of mechanized equipment. Our company has lasted for more than ten years - these are years of experience, which are expressed in the quality of products and special attention to each consumer. We praise everyone, who engaged with us - therefore, our regular clients pick up the most helpful purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4000 such customers, and we constantly compose new agreements. More than 650 contracts are concluded per day, because FAMAGA works all over the world Germany, United Kingdom, South Africa, Iran, Brunei, Equatorial Guinea, India, Uruguay, Congo, Sudan, Mauritius, Myanmar, Morocco, Kenya, Chile, Tonga, Czech Republic, Chad, Dominica, Tanzania, Iceland, United States, Georgia, Gambia, Lithuania, Zambia, Tajikistan, Turkmenistan, Poland, Montenegro, Cape Verde, Greece, South Sudan, Kyrgyzstan, Israel, Liechtenstein, Australia, Angola, Austria, Afghanistan, Antigua and Barbuda, Swaziland, New Zealand, Switzerland, Uganda, Suriname, Malta, Belarus. A well-built logistics network and a partnership network guide us to conduct our units anywhere in the earth immediately without compromising product quality.
A special source of good name for FAMAGA is its employees, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the sphere of industrial equipment.
All outputs from FAMAGA are ensured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been shipped, and this quantity is rising every day. We are proud that customers choose FAMAGA again and again, and we are pleased to make more advanced and technologically advanced industrial equipment so as not to lower the bar.
To request or order, call us by phone or write to the online chat on our official website. You can also send a list of the needful equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Poppet valve |
Mounting orientation | α = 0 ... 90° ±β = 0 ... 90° |
Certificates | CE declaration of conformity |
Working pressure max | See table |
Ambient temperature min./max. | 5 ... 50 °C |
Medium temperature min./max. | 5 ... 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 1 mg/m³ |
Nominal flow Qn | 1300 l/min |
Control | Analog |
DC operating voltage | 24 V |
Voltage tolerance DC | -20% / +30% |
Permissible ripple | 5% |
Max. power consumption | 1400 mA |
Protection class | IP65 |
Weight | 2,05 kg |
Nominal flow Qn with working pressure 7 bar , with secondary pressure 6 bar and Δp = 0.2 bar |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With oil-free, dry air, other installation positions are possible on request. The protection class is only ensured when the plug is mounted properly. For detailed information, see operating instructions. Minimum working pressure = 0.5 bar + max. required secondary pressure Additional pressure setting ranges available on request |
Material |
---|
Housing | Die-cast aluminum Steel |
Seals | Hydrogenated acrylonitrile butadiene rubber |