We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7471326094
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M16x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 350 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 7471326094, connect FAMAGA, the world's main supplier of machine made equipment. Our company has progressed for more than ten years - these are ages of experience, which are represented in the quality of merchandises and private attention to each customer. We value everyone, who cooperated with us - thus, our regular purchasers obtain the most helpful purchase terms and discounts on the manufacturing equipment market. Today, there are more than 4 thousand such buyers, and we constantly make new agreements. More than 750 contracts are concluded per day, because FAMAGA supplies all over the world Germany, United Kingdom, Malaysia, Bahrain, Denmark, India, Montenegro, Panama, South Korea, Switzerland, Yemen, Comoros, Vietnam, Russia, Burkina Faso, Monaco, Uganda, Philippines, Mozambique, Eritrea, Armenia, Serbia, Chad, Indonesia, Mauritania, Benin, El Salvador, Slovakia, Samoa, Madagascar, Finland, Argentina, East Timor, Kazakhstan, Nepal, Macedonia, Tajikistan, The Gambia, Luxembourg, Uruguay. A well-built logistics link and a partnership network assist us to send our units anywhere in the earth with no delay without disreputing product quality.
A specific source of dignity for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the direction of manufacturing equipment.
All items from FAMAGA are ensured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been delivered, and this bulk is ascending every day. We are glad that buyers choose FAMAGA again and again, and we are happy to make more advanced and technologically advanced industrial equipment so as not to lower the bar.
To inquire or book, contact us or write to the online chat on our site. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |