We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472408174
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 25 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 7472408174, contact FAMAGA, the world's main distributor of streamlined equipment. Our company has existed for more than ten years - these are ages of experience, which are portrayed in the quality of products and particular attention to each client. We admire everyone, who conspired with us - therefore, our regular customers bring in the most acceptable purchase conditions and discounts on the manufacturing equipment market. At this moment, there are more than 4500 such consumers, and we constantly compose new agreements. More than 650 affairs are settled per day, because FAMAGA supplies all over the world Germany, United Kingdom, Mozambique, Philippines, Paraguay, Thailand, Georgia, Japan, Mexico, Belgium, Honduras, Madagascar, Fiji, Latvia, Ireland, Netherlands, Tunisia, Romania, Panama, South Korea, Angola, Kenya, Nicaragua, Serbia, Togo, Iran, Suriname, Laos, North Korea, Cape Verde, Turkmenistan, Malaysia, Haiti, South Sudan, East Timor, Eswatini, Syria, Iraq, United Arab Emirates, Estonia, Senegal, Guatemala, Mauritania, Morocco, Finland. A well-shaped logistics system and a partnership network assist us to dispatch our items anywhere in the world on-time without damaging product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the field of factory-made equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this amount is increasing every day. We are proud that consumers choose FAMAGA again and again, and we are glad to make more advanced and technologically advanced industrial equipment so as not to lower the bar.
To request or order, call us by phone or write to the online chat on our official website. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |