We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822396607
Description
Piston rod modification | non-rotating, with front plate,Optionally through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Standardization | NFE 49004 |
Stroke | 50 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822396607, call FAMAGA, the world's foremost company of factory-made equipment. Our company has functioned for more than ten years - these are years of experience, which are depicted in the quality of spare parts and particular attention to each orderer. We appreciate everyone, who worked with us - so, our regular purchasers obtain the most flexible purchase forms and discounts on the industrial equipment market. Today, there are more than 4500 such clients, and we constantly arrange new agreements. More than 650 transactions are made per day, because FAMAGA works all over the world Germany, United Kingdom, Paraguay, Tonga, Latvia, Morocco, Malta, Uzbekistan, Ghana, Canada, Bhutan, Senegal, Belize, Bulgaria, Slovakia, Gambia, Croatia, Chad, Norway, Czech Republic, Tunisia, Djibouti, Zambia, India, Suriname, Uganda, Samoa, Cyprus, Iceland, South Sudan, Denmark, Bosnia and Herzegovina, Burundi, Algeria, Switzerland, Equatorial Guinea, Ecuador, Kenya, Mongolia, Kuwait, Chile, Israel, Central African Republic, Mali. A well-built logistics bond and a partnership network help us to ship our goods anywhere in the globe immediately without disreputing product quality.
A specific source of pride for FAMAGA is its workers, each of whom contributes to our work. We call into our team only professionals, who already have experience in the sphere of industrial equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is amounting every day. We are proud that consumers choose FAMAGA again and again, and we strive to make more developed and technologically developed industrial equipment so as not to lower the bar.
To inquire or order, call us by phone or send a message to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Front plate | Aluminum |
Scraper | Polyurethane |