We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412008547
Description
Number of valve positions | 2 |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Polyamide |
Number of wires | 25-pin |
Port size | D-Sub |
Type | Plug |
Compressed air connection input | Ø 8 |
Compressed air connection output | M7 |
DC operating voltage | 24 V |
Type | Base plate for a single or double solenoid valve |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412008547, catch up with FAMAGA, the world's foremost supplier of machine made equipment. Our company has progressed for more than ten years - these are cycles of experience, which are illustrated in the quality of products and private attention to each consumer. We respect everyone, who cooperated with us - thus, our regular buyers procure the most flexible purchase conditions and discounts on the machine made streamlined equipment market. Nowadays, there are more than 3500 such clients, and we constantly make new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Ghana, Eswatini, Brunei, Dominica, Italy, Andorra, Senegal, Romania, Saudi Arabia, Iran, Antigua and Barbuda, Thailand, Israel, Liechtenstein, Cyprus, Uzbekistan, Macedonia, Austria, North Korea, Estonia, Mali, Iceland, Syria, Equatorial Guinea, Benin, Vietnam, Zambia, Angola, Norway, Azerbaijan, Tunisia, Bosnia and Herzegovina, Djibouti, Sierra Leone, Jordan, Kiribati, Lithuania, Suriname, Rwanda, Czech Republic, Sudan, Moldova. A well-built logistics bond and a partnership network let us to conduct our goods anywhere in the world immediately without damaging product quality.
A special source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the field of machine made streamlined equipment.
All outcomes from FAMAGA are assured - we are responsible for the cause of our work. Now, more than 10 million units of products have been supplied, and this quantity is ascending every day. We are proud that clients choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as to stay on the top.
To request or make a request, contact us or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | Multipole |
Working pressure min./max. | See table |
Ambient temperature min./max. | -5 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
electr. connection | D-Sub plug, 25-pin, on the side, Link structure CMS |
Number of valve positions max. | 2 |
Grid dimension | 11,8 mm |
Rail mounting DIN EN 60715 | TH35 x 15 |
Exhaust (3,5) | With directional exhaust (3/5) |
Exhaust type | Ports separated |
Mounting screw | cross recessed DIN EN ISO 4757-Z0 |
Tightening torque for mounting screws | 0,2 Nm |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Double base plate principle |
Material |
---|
Base plate | Polyamide |
push-in fitting | Brass, nickel-plated |
Seal | Acrylonitrile butadiene rubber |
Screws | Steel |
Tie-rods | Aluminum |