We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412013680
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 200 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412013680, make contact with FAMAGA, the world's key company of streamlined equipment. Our company has advanced for more than ten years - these are ages of experience, which are illustrated in the quality of products and particular attention to each user. We understand everyone, who engaged with us - hence, our regular consumers accept the most flexible purchase forms and discounts on the machine made streamlined equipment market. At this time, there are more than 4000 such purchasers, and we constantly sign new agreements. More than 650 contracts are concluded per day, because FAMAGA delivers all over the world Germany, United Kingdom, Barbados, Suriname, Mongolia, Iraq, Jordan, India, Liberia, Ireland, South Korea, Central African Republic, Honduras, Uruguay, Ukraine, Brazil, Lebanon, El Salvador, Grenada, Mali, Rwanda, Armenia, Belarus, Nigeria, Turkey, Kiribati, Tajikistan, Antigua and Barbuda, Morocco, Liechtenstein, Brunei, Sierra Leone, Comoros, New Zealand, Botswana, Angola, Azerbaijan, Iceland, Switzerland, Montenegro, Burkina Faso, Senegal, Djibouti, Cameroon, Eswatini, Slovakia, Denmark. A well-shaped logistics series and a partnership network allow us to ship our products anywhere in the world with no delay without undermining product quality.
A particular source of repute for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only specialists, who already have experience in the field of machine made streamlined equipment.
All products from FAMAGA are verified - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this amount is rising every day. We are proud that buyers choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as stay in control.
To ask a question or order, get in touch with us or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |