We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412019804
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 12 mm |
Piston rod thread | M3 |
Standardization | ISO 15524 |
Stroke | 25 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412019804, make contact with FAMAGA, the world's key vendor of factory-made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are described in the quality of merchandises and special attention to each customer. We respect everyone, who joined with us - hence, our regular customers obtain the most desirable purchase conditions and discounts on the machine made streamlined equipment market. At this time, there are more than 3500 such consumers, and we constantly compose new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Turkmenistan, The Bahamas, Nigeria, Bulgaria, Hungary, Azerbaijan, Lesotho, Antigua and Barbuda, France, Cape Verde, Serbia, Guinea, Andorra, Mauritius, Tunisia, Georgia, Gambia, Bosnia and Herzegovina, South Korea, India, Ghana, Libya, Kenya, Saudi Arabia, Tonga, Liberia, Malta, Zambia, Paraguay, Liechtenstein, Australia, Jordan, Turkey, Bangladesh, Mongolia, Afghanistan, Laos, Iran, Niger, Slovakia, Morocco, Greece, Macedonia. A well-elaborated logistics link and a partnership network allow us to dispatch our goods anywhere in the world immediately without disreputing product quality.
A special source of honor for FAMAGA is its team members, each of whom contributes to our work. We request into our team only experts, who already have experience in the field of machine made streamlined equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this quantity is increasing every day. We are proud that clients choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as stay in control.
To ask a question or make a request, get in touch with us or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |