We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821302406
Description
Activation | Mechanical |
Parts | Pressure regulator |
Relieving exhaust | with relieving air exhaust |
Housing | Die cast zinc |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 2000 l/min |
Compressed air connection | G 1/4 |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0821302406, connect FAMAGA, the world's major vendor of streamlined equipment. Our company has lasted for more than ten years - these are cycles of experience, which are described in the quality of merchandises and individual attention to each purchaser. We value everyone, who worked with us - therefore, our regular purchasers receive the most flexible purchase forms and discounts on the factory-made equipment market. Now, there are more than 4000 such purchasers, and we constantly sign new agreements. More than 700 proceedings are resolved per day, because FAMAGA works all over the earth Germany, United Kingdom, Antigua and Barbuda, Angola, Congo, Mali, Uruguay, Austria, Cameroon, Denmark, Bhutan, Samoa, Benin, Gambia, Macedonia, Eswatini, Lebanon, Panama, Burundi, Monaco, Latvia, Lithuania, Australia, Senegal, Iceland, Ukraine, Belize, Norway, Brazil, Turkey, Tunisia, Equatorial Guinea, Andorra, Uganda, Azerbaijan, Argentina, Kuwait, Moldova, Sudan, Czech Republic, Libya, Costa Rica, Slovakia, Laos. A well-built logistics bond and a partnership network allow us to conduct our units anywhere in the planet with no delay without disreputing product quality.
A particular source of honor for FAMAGA is its workers, each of whom contributes to our work. We call into our team only specialists, who already have experience in the field of factory-made equipment.
All products from FAMAGA are ensured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been provided, and this number is amounting every day. We are proud that consumers choose FAMAGA again and again, and we are happy to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To request or place an order, contact us or write a message to the online chat on our site. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Parts | Pressure regulator |
Mounting orientation | Any |
Certificates | suitable for ATEX |
Working pressure min./max. | 0,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Regulator type | Diaphragm-type pressure regulator Can be assembled into blocks |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | See table |
Pressure supply | single |
Activation | Mechanical |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. The rear pressure gauge connection on the pressure regulator is closed with a blanking plug, the front connection is open. Depending on the customer application, a second blanking plug may be necessary. Please order separately (see accessories). Relieving exhaust (≤ 0.3 bar over set pressure). With rear exhaust (> 3 bar ). | |
Recommended pre-filtering | 5 µm |
Material |
---|
Housing | Die cast zinc |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |