We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480177190
Description
Functional principle | double-acting |
Cushioning | pneumatically |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | 3/4-16 UNF |
Stroke | 254 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | 3/8 NPT |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480177190, communicate with FAMAGA, the world's principle retailer of industrialized equipment. Our company has operated for more than ten years - these are years of experience, which are illustrated in the quality of products and particular attention to each client. We cherish everyone, who liased with us - so, our regular buyers pick up the most flexible purchase conditions and discounts on the machine made streamlined equipment market. Now, there are more than 4500 such consumers, and we constantly make new agreements. More than 750 transactions are made per day, because FAMAGA delivers all over the world Germany, United Kingdom, Laos, Serbia, Belize, Senegal, Lebanon, Eritrea, Bosnia and Herzegovina, Lithuania, Moldova, Tonga, Indonesia, Swaziland, Kenya, Israel, Brazil, Cameroon, Ireland, Iceland, Switzerland, Grenada, Montenegro, Fiji, Gambia, Paraguay, Hungary, Nigeria, Slovakia, Australia, Andorra, El Salvador, Zambia, United Arab Emirates, Argentina, Cyprus, Thailand, Malta, Iran, Ukraine, Algeria, Iraq, India, Uruguay, Kazakhstan. A well-shaped logistics system and a partnership network cheer us to dispatch our goods anywhere in the earth as soon as possible without undermining product quality.
A special source of repute for FAMAGA is its workers, each of whom contributes to common cause. We request into our team only experts, who already have experience in the direction of factory-made equipment.
All goods from FAMAGA are verified - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been provided, and this amount is ascending every day. We are glad that customers choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as keep on top of it.
To ask a question or order, phone us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |