We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480163055
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 400 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R480163055, reach FAMAGA, the world's principle distributor of industrial equipment. Our company has lasted for more than ten years - these are years of experience, which are illustrated in the quality of products and personalseparate attention to each orderer. We admire everyone, who conspired with us - therefore, our regular purchasers obtain the most flexible purchase conditions and discounts on the machine made streamlined equipment market. At present, there are more than 4500 such customers, and we constantly arrange new agreements. More than 750 transactions are made per day, because FAMAGA delivers all over the world Germany, United Kingdom, Greece, East Timor, Liechtenstein, Chad, Madagascar, Lebanon, Belarus, France, Montenegro, The Gambia, United Arab Emirates, Haiti, Andorra, Tanzania, Grenada, China, Monaco, Kiribati, Vietnam, Uganda, Gambia, Qatar, Tonga, Iran, Paraguay, Thailand, South Sudan, Namibia, Albania, Yemen, North Korea, Azerbaijan, Antigua and Barbuda, Ukraine, Sweden, Uruguay, Switzerland, Sierra Leone, Cameroon, Slovakia, Zambia, Brunei, Lithuania, Armenia. A well-developed logistics network and a partnership network assist us to deliver our items anywhere in the earth as soon as possible without discrediting product quality.
A special source of pride for FAMAGA is its team members, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the direction of factory-made equipment.
All merchandises from FAMAGA are ensured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been provided, and this amount is amounting every day. We are glad that customers choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as keep on top of it.
To get some advice or order, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |