We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412013718
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 200 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412013718, connect FAMAGA, the world's central company of factory-made equipment. Our company has existed for more than ten years - these are cycles of experience, which are outlined in the quality of products and special attention to each client. We understand everyone, who cooperated with us - hence, our regular consumers receive the most desirable purchase terms and discounts on the industrial equipment market. At this time, there are more than 4000 such consumers, and we constantly form new agreements. More than 750 purchases are terminated per day, because FAMAGA works all over the globe Germany, United Kingdom, Comoros, Papua New Guinea, United Arab Emirates, Croatia, Algeria, Thailand, Netherlands, Guyana, Haiti, Kiribati, Greece, Albania, Pakistan, Niger, Tonga, Guatemala, Mali, The Bahamas, Qatar, Monaco, Laos, Peru, Chad, Syria, Jamaica, Liberia, Norway, Afghanistan, Kyrgyzstan, Russia, Bosnia and Herzegovina, Serbia, China, United States, Georgia, Namibia, Vietnam, Estonia, Yemen, Mozambique, Sierra Leone, Seychelles, Mauritania. A well-developed logistics connection and a partnership network let us to dispatch our units anywhere in the planet with no delay without disreputing product quality.
A specific source of honor for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only experts, who already have experience in the field of manufacturing equipment.
All outcomes from FAMAGA are verified - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is rising every day. We are proud that purchasers choose FAMAGA again and again, and we strive to make more progressive and technologically advanced industrial equipment so as to stay on the top.
To ask a question or order, call us by phone or write a message to the online chat on our official website. You can also send a list of the necessary equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |