We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821300851
Description
Parts | Filter pressure regulator |
Condensate drain | semi-automatic, open without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 40 µm |
Pressure gauge | with pressure gauge |
Housing | Die-cast aluminum |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 15000 l/min |
Compressed air connection | G 3/4 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0821300851, call FAMAGA, the world's dominant retailer of industrial equipment. Our company has advanced for more than ten years - these are years of experience, which are expressed in the quality of items and special attention to each customer. We admire everyone, who liased with us - thus, our regular clients bring in the most beneficial purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 3500 such clients, and we constantly make new agreements. More than 600 transactions are made per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Guinea-Bissau, Congo, Indonesia, Swaziland, Netherlands, Philippines, Mauritius, Belgium, Iceland, Burkina Faso, Vietnam, Mozambique, Laos, Panama, Afghanistan, Madagascar, Djibouti, Ireland, Switzerland, South Korea, Botswana, East Timor, Suriname, Togo, Kenya, Brunei, Ghana, United Arab Emirates, Pakistan, Georgia, Chile, Serbia, Guatemala, El Salvador, Morocco, Haiti, Finland, Croatia, Tunisia. A well-shaped logistics link and a partnership network cheer us to send our goods anywhere in the earth immediately without damaging product quality.
A special source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only experts, who already have experience in the range of industrial equipment.
All merchandises from FAMAGA are assured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this bulk is increasing every day. We are happy that users choose FAMAGA again and again, and we are pleased to make more progressive and technologically innovative industrial equipment so as stay in control.
To inquire or order, phone us or write to the online chat on our site. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 15000 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | 0,5 ... 10 bar |
Pressure supply | single |
Filter reservoir volume | 125 cm³ |
Filter element | exchangeable |
Max. Internal air consumption | 0,5 l/min |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Suitable for use in Ex zones 1, 2, 21, 22. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. The rear pressure gauge connection on the pressure regulator is closed with a blanking plug, the front connection is open. Depending on the customer application, a second blanking plug may be necessary. Please order separately (see accessories). Mounting: mounting bracket 1821336017 / block assembly kit 1827009593 | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 7 : 7 : - |
Material |
---|
Housing | Die-cast aluminum |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Steel |
Filter insert | Polyethylene |