We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412000242
Description
Actuating control | single solenoid |
Return type | With spring return |
Switching principle | 5/2 |
Version | Spool valve, positive overlapping |
Housing | Aluminum,Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Number of wires | 3-pin |
Port size | EN 175301-803, form A |
Type | Plug |
Nominal flow Qn | 4100 l/min |
Compressed air connection input | M22x1,5 |
Compressed air connection output | M22x1,5 |
Activation | Electrically |
Temperature resistance | -25 °C cold-resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412000242, contact FAMAGA, the world's foremost distributor of streamlined equipment. Our company has functioned for more than ten years - these are years of experience, which are expressed in the quality of goods and special attention to each orderer. We appreciate everyone, who conspired with us - hence, our regular purchasers accept the most desirable purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 4000 such customers, and we constantly arrange new agreements. More than 650 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Cambodia, Cuba, Bulgaria, Thailand, Chad, Malta, Equatorial Guinea, Colombia, Serbia, Israel, Norway, Czech Republic, Albania, Eswatini, Kazakhstan, Montenegro, Kiribati, Brazil, Kenya, Rwanda, Namibia, Sudan, Uruguay, Macedonia, Bolivia, Senegal, Madagascar, Tanzania, Mali, Tunisia, Belarus, Mongolia, Niger, Burundi, New Zealand, Iraq, Lithuania, North Korea, Jamaica. A well-elaborated logistics series and a partnership network assist us to ship our items anywhere in the globe on-time without damaging product quality.
A specific source of honor for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are assured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is rising every day. We are pleased that consumers choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To get some advice or place an order, contact us or send a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Sealing principle | Soft sealing |
Working pressure min./max. | See table |
Control pressure min./max. | See table |
Ambient temperature min./max. | See table |
Medium temperature min./max. | See table |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Nominal flow Qn | 4100 l/min |
Pilot control exhaust | with directional pilot air exhaust |
Reverse polarity protection | Protected against polarity reversal |
Compatibility index | See table |
Duty cycle | 100 % |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
*Note: Basic valves feature a maximum working pressure of 16 bar. When combined with standard CNOMO pilots, the maximum working pressure is 10 bar. |
Material |
---|
Housing | Aluminum Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber Polyurethane |