We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637837
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 16 mm |
Piston rod thread | M4 |
Standardization | ISO 15524 |
Stroke | 15 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480637837, catch up with FAMAGA, the world's primary producer of manufacturing equipment. Our company has progressed for more than ten years - these are ages of experience, which are described in the quality of spare parts and special attention to each consumer. We esteem everyone, who conspired with us - thus, our regular buyers accept the most convenient purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such buyers, and we constantly make new agreements. More than 700 agreements are achieved per day, because FAMAGA works all over the world Germany, United Kingdom, Brazil, Portugal, France, Malta, Palestine, Slovenia, Guinea, Montenegro, Azerbaijan, Jamaica, Lebanon, Mongolia, Belize, Greece, Liechtenstein, Bolivia, Antigua and Barbuda, Czech Republic, Tanzania, Eswatini, Hungary, Sudan, Central African Republic, India, China, Australia, Kuwait, Norway, Tonga, Slovakia, Iceland, Rwanda, Ukraine, Armenia, Yemen, Israel, Senegal, Malaysia, Kiribati, Ghana, Mali, Samoa. A well-built logistics link and a partnership network allow us to dispatch our goods anywhere in the planet as soon as possible without discrediting product quality.
A specific source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All goods from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is rising every day. We are pleased that clients choose FAMAGA again and again, and we are happy to make more exceptional and technologically innovative industrial equipment so as to stay on the top.
To consult or book, contact us or write to the online chat on our official website. You can also direct a list of the necessary equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note the selection of fittings for strokes < 10 mm . |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |