We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480177095
Description
Functional principle | double-acting |
Cushioning | pneumatically |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | 3/4-16 UNF |
Stroke | 228.6 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | 3/8 NPT |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R480177095, communicate with FAMAGA, the world's central retailer of industrialized equipment. Our company has operated for more than ten years - these are cycles of experience, which are described in the quality of merchandises and personalseparate attention to each purchaser. We admire everyone, who liased with us - so, our regular purchasers pick up the most desirable purchase forms and discounts on the machine made streamlined equipment market. Nowadays, there are more than 4500 such clients, and we constantly compose new agreements. More than 750 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Samoa, Eswatini, Guinea-Bissau, Peru, Colombia, Lithuania, The Bahamas, Belarus, Papua New Guinea, Tunisia, Angola, Bangladesh, Malawi, Zambia, Yemen, Mauritania, Bosnia and Herzegovina, Guinea, Hungary, Central African Republic, Ghana, Denmark, Mauritius, Jordan, Haiti, Kenya, Czech Republic, Croatia, Austria, Afghanistan, Tonga, Cameroon, Mongolia, Libya, Nigeria, Greece, East Timor, Senegal, Iraq, Niger, Finland, Israel, Jamaica, Iran, Nepal. A well-developed logistics connection and a partnership network assist us to conduct our products anywhere in the earth promptly without discrediting product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the direction of factory-made equipment.
All goods from FAMAGA are ensured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been provided, and this amount is increasing every day. We are glad that purchasers choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as keep on top of it.
To ask a question or order, phone us or send a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |