We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412009229
Description
Parts | Standard oil-mist lubricator |
Type of filling | Semi-automatic oil filling during operation,Manual oil filling |
inspection glass | with window |
Housing | Polyamide |
Reservoir | Die cast zinc |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 15800 l/min |
Compressed air connection | G 3/4 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412009229, reach FAMAGA, the world's prime distributor of streamlined equipment. Our company has progressed for more than ten years - these are ages of experience, which are described in the quality of merchandises and special attention to each user. We understand everyone, who conspired with us - hence, our regular customers procure the most desirable purchase forms and discounts on the machine made streamlined equipment market. At present, there are more than 4000 such customers, and we constantly make new agreements. More than 650 contracts are concluded per day, because FAMAGA delivers all over the world Germany, United Kingdom, Burma, The Bahamas, Palestine, Bhutan, Azerbaijan, Equatorial Guinea, Seychelles, India, Cape Verde, Uzbekistan, Armenia, Singapore, New Zealand, Eswatini, Israel, Libya, Niger, Nicaragua, Cameroon, Monaco, Laos, Luxembourg, Bangladesh, Costa Rica, Namibia, Slovakia, Qatar, Montenegro, Indonesia, Tunisia, Greece, Denmark, Nigeria, Dominica, Thailand, Georgia, Austria, Mozambique, Central African Republic, Pakistan, Macedonia, Iceland. A well-elaborated logistics series and a partnership network let us to deliver our elements anywhere in the world with no delay without disreputing product quality.
A particular source of honor for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the field of machine made streamlined equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that buyers choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as keep on top of it.
To consult or place an order, get in touch with us or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Oil-mist lubricator, Can be assembled into blocks |
Parts | Standard oil-mist lubricator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 0,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Lubricator reservoir volume | 181 cm³ |
Type of filling | Semi-automatic oil filling during operation Manual oil filling |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Electrical level detection only with ST6 sensor with reed contact, sensor holder included in the scope of the delivery. Sensor not included in scope of delivery, sensor installation prepared. The entire preset drip quantity enters the pressure system. Manual oil filling possible during operation at a maximum operating pressure of 10 bar. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. | |
Oil dosing at 1000 l/min | 1-2 drops |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Polyamide |