We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001420
Description
| Functional principle | Single-acting, retracted without pressure |
| Cushioning | elastic |
| Magnetic piston | with magnetic piston |
| Piston diameter | 100 mm |
| Piston rod thread | M12 |
| Standardization | ISO 21287 |
| Stroke | 15 mm |
| Sealing material | Polyurethane |
| Scraper | Polyurethane |
| Compressed air connection | G 1/8 |
| Compressed air connection type | Internal thread |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are looking for Aventics (brand of Emerson) R422001420, get in touch with FAMAGA, the world's leading distributor of industrialized equipment. Our company has advanced for more than ten years - these are years of experience, which are illustrated in the quality of products and private attention to each client. We value everyone, who liased with us - thus, our regular clients bring in the most favorable purchase terms and discounts on the industrial equipment market. At present, there are more than 3500 such consumers, and we constantly compose new agreements. More than 700 affairs are settled per day, because FAMAGA delivers all over the world Germany, United Kingdom, Panama, Iceland, Myanmar, Kyrgyzstan, Belarus, Slovenia, Cuba, Libya, Fiji, Japan, Guyana, Denmark, Indonesia, Algeria, Tonga, Malta, Senegal, Samoa, Nepal, Brunei, Switzerland, Finland, Philippines, Benin, Suriname, Greece, Croatia, Botswana, Brazil, South Sudan, Sierra Leone, Malaysia, Luxembourg, Equatorial Guinea, Syria, Norway, Dominica, Central African Republic, United Arab Emirates, Turkey, Comoros, Swaziland. A well-elaborated logistics link and a partnership network guide us to conduct our items anywhere in the world on-time without undermining product quality.
A special source of dignity for FAMAGA is its team members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are verified - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been supplied, and this number is ascending every day. We are proud that users choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as stay in control.
To request or book, call us by phone or write to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Standards | ISO 21287 |
| Compressed air connection | Internal thread |
| Ambient temperature min./max. | -20 ... 80 °C |
| Medium temperature min./max. | -20 ... 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Aluminum |
| End cover | Aluminum |
| Seal | Polyurethane |
| Scraper | Polyurethane |
