We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001410
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M12 |
Standardization | ISO 21287 |
Stroke | 10 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R422001410, reach FAMAGA, the world's influential supplier of manufacturing equipment. Our company has worked for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and personalseparate attention to each purchaser. We admire everyone, who collaborated with us - therefore, our regular purchasers get the most flexible purchase forms and discounts on the machine made streamlined equipment market. Nowadays, there are more than 4000 such buyers, and we constantly arrange new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Bosnia and Herzegovina, Palestine, Côte d\'Ivoire, Belgium, Ecuador, Hungary, Thailand, Kiribati, Greece, Tajikistan, Chad, India, Nigeria, Haiti, Uzbekistan, Mauritius, Laos, Botswana, Zambia, Netherlands, Antigua and Barbuda, Sudan, El Salvador, Slovakia, Mauritania, Equatorial Guinea, Seychelles, Tanzania, Macedonia, Iran, Senegal, North Korea, Algeria, Tonga, Bulgaria, Ghana, Jordan, Czech Republic, Niger, Comoros. A well-developed logistics chains and a partnership network allow us to ship our goods anywhere in the globe immediately without damaging product quality.
A particular source of honor for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the direction of factory-made equipment.
All products from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is growing every day. We are pleased that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To get some advice or make a request, contact us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Scraper | Polyurethane |