We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412000410
Description
Adjustable angle of rotation max. | 180 ° |
Adjustable angle of rotation min. | 0 ° |
Frame size | RCM-25 |
Version | double piston with rack |
Cushioning | hydraulic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Housing | Aluminum |
Sealing material | Acrylonitrile butadiene rubber |
Compressed air connection | M5 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R412000410, reach FAMAGA, the world's prime producer of manufacturing equipment. Our company has progressed for more than ten years - these are ages of experience, which are illustrated in the quality of outputs and personalseparate attention to each consumer. We admire everyone, who conspired with us - therefore, our regular clients get the most desirable purchase terms and discounts on the manufacturing equipment market. At this moment, there are more than 4000 such clients, and we constantly make new agreements. More than 700 affairs are settled per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Chile, Indonesia, Rwanda, Qatar, Portugal, Cambodia, Comoros, Turkmenistan, Malawi, Israel, Suriname, Belgium, Nepal, Tanzania, Mali, Liberia, Zambia, Ireland, Namibia, Nicaragua, Andorra, Netherlands, Macedonia, Kazakhstan, Madagascar, Iceland, Uzbekistan, Jamaica, Turkey, East Timor, Moldova, Hungary, The Gambia, China, Malaysia, North Korea, Argentina, Denmark, United Arab Emirates, Niger, Cyprus, Tunisia, Kenya. A well-shaped logistics chains and a partnership network assist us to deliver our items anywhere in the earth as soon as possible without damaging product quality.
A specific source of dignity for FAMAGA is its employees, each of whom contributes to our work. We request into our team only professionals, who already have experience in the field of factory-made equipment.
All items from FAMAGA are guaranteed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been supplied, and this number is increasing every day. We are glad that customers choose FAMAGA again and again, and we are glad to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To inquire or make a request, contact us or send a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Working pressure min./max. | 4 ... 8 bar |
Ambient temperature min./max. | 5 ... 60 °C |
Medium temperature min./max. | 5 ... 60 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
air duct | with air duct |
Cushioning | hydraulic non-adjustable |
Theoretical torque at | 6 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
NOTICE:For positioning without overswing in the intermediate position, it is recommended to limit the mass moment of inertia to 40% of the maximum permissible value! |
Material |
---|
Housing | Aluminum, anodized |
Cap | Aluminum, black anodized |
Base | Aluminum, black anodized |
Seal | Acrylonitrile butadiene rubber |
Axis | Steel, hardened |
Rotary flange | Steel, hardened |