We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472D02822
Description
Standardization | ISO 15407-1 |
Frame size | 18 mm |
Switching principle | 2x3/2 |
Version | Spool valve, positive overlapping |
Housing | Aluminum |
Sealing material | Acrylonitrile butadiene rubber,Hydrogenated acrylonitrile butadiene rubber |
Connector standard | EN 61076-2-101 |
Protection class | IP65 |
Number of wires | 3-pin |
Port size | M12 |
Type | Plug |
Nominal flow Qn | 450 l/min |
Compressed air connection input | VDMA 02 base plate |
Compressed air connection output | VDMA 02 base plate |
DC operating voltage | 24 V |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 7472D02822, make contact with FAMAGA, the world's influential producer of machine made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are described in the quality of outputs and personalseparate attention to each buyer. We praise everyone, who joined with us - therefore, our regular purchasers obtain the most flexible purchase terms and discounts on the manufacturing equipment market. At this moment, there are more than 4500 such purchasers, and we constantly arrange new agreements. More than 650 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Pakistan, Ecuador, Mauritius, Vietnam, Singapore, Latvia, South Korea, Burkina Faso, Algeria, Poland, Botswana, Netherlands, Croatia, The Bahamas, Guatemala, Comoros, Thailand, Yemen, Kiribati, Ireland, Kenya, Chile, Fiji, El Salvador, Mexico, Kuwait, Finland, Hungary, United Arab Emirates, Serbia, Nicaragua, Seychelles, Czech Republic, Angola, Malaysia, Turkey, Swaziland, Andorra, Sweden, Djibouti, Bangladesh, Morocco, Antigua and Barbuda. A well-shaped logistics chains and a partnership network allow us to ship our items anywhere in the globe on-time without damaging product quality.
A specific source of dignity for FAMAGA is its personnel, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the range of factory-made equipment.
All goods from FAMAGA are affirmed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this quantity is growing every day. We are glad that consumers choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To get some advice or book, get in touch with us or write to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Sealing principle | Soft sealing |
Blocking principle | Base plate principle, multiple |
Connection type | Plate connection |
Standards | ISO 15407-1, 18 mm |
Connector standard | EN 61076-2-101 |
Working pressure min./max. | See table |
Control pressure min./max. | 2,5 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 450 l/min |
Protection class with connection | IP65 |
Protective circuit | TVS diode |
LED status display | Yellow |
Duty cycle | 100 % |
Typ. switch-on time | See table |
Typ. switch-off time | See table |
Mounting screw | M3 |
Weight | 0,12 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Housing | Aluminum, anodized |
Seals | Acrylonitrile butadiene rubber Hydrogenated acrylonitrile butadiene rubber |
Front plate | Polyamide |