We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5610102150
Description
Housing | Die-cast aluminum |
Sealing material | Acrylonitrile butadiene rubber |
CE declaration of conformity | |
Protection class | IP54 |
Port size | EN 175301-803, form A |
Type | Plug |
Nominal flow Qn | 800 l/min |
Hysteresis | 0.04 bar |
Compressed air connection input | G 1/4 |
Compressed air connection output | G 1/4 |
DC operating voltage | 24 V |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 5610102150, reach FAMAGA, the world's dominant vendor of factory-made equipment. Our company has lasted for more than ten years - these are ages of experience, which are portrayed in the quality of outputs and personalseparate attention to each purchaser. We cherish everyone, who worked with us - therefore, our regular clients pick up the most helpful purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4000 such clients, and we constantly compose new agreements. More than 750 transactions are made per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Cambodia, Saudi Arabia, Lebanon, Yemen, Bahamas, Myanmar, Cape Verde, Norway, Colombia, Ukraine, Serbia, Tunisia, Bulgaria, Botswana, Armenia, Bosnia and Herzegovina, Eritrea, Australia, Thailand, Montenegro, Denmark, Bolivia, Sudan, Liechtenstein, Kazakhstan, Uganda, Slovakia, Madagascar, Iceland, Argentina, Burundi, The Gambia, Niger, Albania, Paraguay, Estonia, Mongolia, Senegal, Brazil, Burkina Faso, Algeria, Seychelles, Rwanda, Iran. A well-developed logistics network and a partnership network assist us to deliver our goods anywhere in the earth immediately without compromising product quality.
A special source of good name for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only experts, who already have experience in the field of machine made streamlined equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been provided, and this number is increasing every day. We are glad that clients choose FAMAGA again and again, and we are eager to make more progressive and technologically advanced industrial equipment so as not to lower the bar.
To inquire or make a request, get in touch with us or write to the online chat on our site. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Poppet valve |
Mounting orientation | vertical |
Certificates | CE declaration of conformity |
Working pressure max | See table |
Ambient temperature min./max. | 5 ... 50 °C |
Medium temperature min./max. | 5 ... 50 °C |
Compressed air connection input | G 1/4 |
Compressed air connection output | G 1/4 |
Compressed air connection, exhaust | G 1/4 |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 0,1 mg/m³ |
Nominal flow Qn | 800 l/min |
Control | Analog |
DC operating voltage | 24 V |
Voltage tolerance DC | -20% / +20% |
Hysteresis | 0.04 bar |
Permissible ripple | 5% |
Max. power consumption | 200 mA |
Protection class | IP54 |
Weight | 2 kg |
Nominal flow Qn with working pressure 7 bar , with secondary pressure 6 bar and Δp = 0.2 bar |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The protection class is only ensured when the plug is mounted properly. For detailed information, see operating instructions. |
Material |
---|
Housing | Die-cast aluminum |
Seals | Acrylonitrile butadiene rubber |