We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412007052
Description
Parts | Microfilter |
Condensate drain | fully automatic, open without pressure |
filter porosity | 0.01 µm |
inspection glass | with window |
Housing | Polyamide |
Reservoir | Die cast zinc |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 700 l/min |
Compressed air connection | G 1/2 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412007052, make contact with FAMAGA, the world's dominant distributor of mechanized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are described in the quality of merchandises and special attention to each consumer. We admire everyone, who engaged with us - so, our regular purchasers pick up the most convenient purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 3500 such customers, and we constantly arrange new agreements. More than 700 transactions are made per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Dominican Republic, Fiji, Luxembourg, El Salvador, Indonesia, Palestine, Colombia, Zambia, Chad, Brazil, Dominica, Romania, Finland, Kazakhstan, Burkina Faso, Denmark, Sierra Leone, Madagascar, Belize, Yemen, Eritrea, Kuwait, Antigua and Barbuda, Comoros, Bulgaria, Estonia, Qatar, Mongolia, Bolivia, Haiti, Jordan, Mexico, Cyprus, The Gambia, Serbia, Angola, Philippines, Niger, China, Albania, Swaziland, Ireland, United States, Ghana. A well-elaborated logistics network and a partnership network cheer us to ship our goods anywhere in the world as soon as possible without undermining product quality.
A particular source of honor for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the range of manufacturing equipment.
All outputs from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this number is rising every day. We are happy that clients choose FAMAGA again and again, and we are eager to make more developed and technologically developed industrial equipment so as stay in control.
To get some advice or book, phone us or write a message to the online chat on our official website. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Microfilter, Can be assembled into blocks |
Parts | Microfilter |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Filter reservoir volume | 49 cm³ |
Filter element | exchangeable |
filter porosity | 0,01 µm |
Condensate drain | See table |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. | |
Recommended pre-filtering | 0,3 µm |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 1 : - : 2 |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Polyamide |
Filter insert | Borosilicate glass fiber |