We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820061898
Description
Actuating control | double solenoid |
Switching principle | 5/3 |
Version | Spool valve, positive overlapping |
Housing | Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Connector standard | DIN EN 60947-5-2 |
Protection class | IP65 |
Number of wires | 4-pin |
Port size | M8 |
Type | Plug |
Nominal flow Qn | 700 l/min |
Compressed air connection output | G 1/8 |
DC operating voltage | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0820061898, make contact with FAMAGA, the world's central company of mechanized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are described in the quality of goods and particular attention to each orderer. We cherish everyone, who conspired with us - therefore, our regular consumers pick up the most helpful purchase forms and discounts on the manufacturing equipment market. At this moment, there are more than 4000 such consumers, and we constantly make new agreements. More than 750 proceedings are resolved per day, because FAMAGA supplies all over the world Germany, United Kingdom, North Korea, Myanmar, Lithuania, Turkey, Namibia, Guinea, Panama, Netherlands, Morocco, Estonia, Costa Rica, Kiribati, Malaysia, New Zealand, Chad, Lebanon, Poland, Burundi, Norway, Botswana, Angola, India, Jamaica, Ireland, Liechtenstein, Senegal, Israel, Kuwait, Austria, Nigeria, United States, Antigua and Barbuda, Malta, Rwanda, Moldova, Thailand, Argentina, Slovakia, Haiti, Montenegro, Australia, Ukraine, Equatorial Guinea, Sudan, Tanzania. A well-elaborated logistics network and a partnership network let us to ship our units anywhere in the earth as soon as possible without discrediting product quality.
A particular source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the field of factory-made equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been shipped, and this number is ascending every day. We are pleased that users choose FAMAGA again and again, and we are happy to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To get some advice or book, get in touch with us or write a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Pilot | External |
Sealing principle | Soft sealing |
Blocking principle | Plate principle |
Working pressure min./max. | -0,9 ... 10 bar |
Control pressure min./max. | 3 ... 10 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 700 l/min |
Connector standard | DIN EN 60947-5-2 |
Protection class acc. to DIN EN 61140 Electrically | Class III |
Protection class with connection | IP65 |
LED status display | Yellow |
Duty cycle | 100 % |
Typ. switch-on time | 10 ms |
Typ. switch-off time | 11 ms |
Weight | 0,165 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber Polyurethane |
Front plate | Polyamide fiber-glass reinforced |
Threaded bushing | Brass Die cast zinc, nickel-plated chrome-plated |