We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480651380
Description
Functional principle | double-acting |
Cushioning | pneumatically |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Standardization | ISO 6432 |
Stroke | 100 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Thermoplastic polyurethane (TPU) |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480651380, connect FAMAGA, the world's chief vendor of industrial equipment. Our company has worked for more than ten years - these are ages of experience, which are expressed in the quality of goods and private attention to each purchaser. We cherish everyone, who joined with us - so, our regular customers procure the most favorable purchase terms and discounts on the industrial equipment market. Today, there are more than 4500 such customers, and we constantly compose new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Dominican Republic, Turkmenistan, Japan, Switzerland, Rwanda, Iceland, Bahamas, Croatia, Eritrea, Sweden, Nepal, Lebanon, Serbia, Singapore, Andorra, Georgia, Netherlands, Zimbabwe, Samoa, Czech Republic, East Timor, Haiti, Morocco, Seychelles, Fiji, Liechtenstein, South Korea, Ghana, Estonia, Egypt, Vietnam, Namibia, Jamaica, Macedonia, United States, Finland, Indonesia, Botswana, Mauritania, Bosnia and Herzegovina, Kuwait, Mauritius, Albania, Tonga, Cyprus, Pakistan. A well-built logistics connection and a partnership network cheer us to deliver our products anywhere in the globe on-time without damaging product quality.
A specific source of dignity for FAMAGA is its team members, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been provided, and this amount is increasing every day. We are pleased that consumers choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To get some advice or order, phone us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel, ground |
Piston rod | Stainless steel, ground |
Piston | Aluminum |
Front cover | Stainless steel, Electropolished |
End cover | Stainless steel, Electropolished |
Seal | Nitrile butadiene rubber |
Nut for cylinder mounting | Stainless steel, ground |
Nut for piston rod | Stainless steel, ground |
Scraper | Thermoplastic polyurethane (TPU) |
Guide bushing | Steel |