We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820039334
Description
Standardization | ISO 15407-1 |
Frame size | 18 mm |
Switching principle | 5/3 |
Version | Spool valve, positive overlapping |
Housing | Aluminum |
Sealing material | Acrylonitrile butadiene rubber,Hydrogenated acrylonitrile butadiene rubber |
Connector standard | ISO 15217 |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 250 l/min |
Compressed air connection input | VDMA 02 base plate |
Compressed air connection output | VDMA 02 base plate |
Operational voltage AC at 50 Hz | 110 V |
Operational voltage AC at 60 Hz | 110 V |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0820039334, get in touch with FAMAGA, the world's principle company of industrialized equipment. Our company has operated for more than ten years - these are ages of experience, which are described in the quality of spare parts and special attention to each orderer. We cherish everyone, who engaged with us - therefore, our regular buyers receive the most attractive purchase forms and discounts on the manufacturing equipment market. Nowadays, there are more than 4000 such buyers, and we constantly make new agreements. More than 600 agreements are achieved per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Portugal, Cambodia, Latvia, Greece, Moldova, Norway, Dominica, Benin, France, Chad, Iraq, Peru, Belarus, Antigua and Barbuda, Tanzania, Thailand, Singapore, Australia, Denmark, Ukraine, Saudi Arabia, Eswatini, Chile, Tunisia, Switzerland, Sierra Leone, Philippines, Sudan, Malta, Uganda, Montenegro, Morocco, India, Paraguay, Lithuania, Slovakia, Burundi, Uruguay, Angola, Brazil, China, Iceland, Libya. A well-developed logistics series and a partnership network allow us to send our goods anywhere in the earth immediately without compromising product quality.
A specific source of dignity for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only experts, who already have experience in the field of factory-made equipment.
All products from FAMAGA are assured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been delivered, and this number is rising every day. We are pleased that clients choose FAMAGA again and again, and we are eager to make more progressive and technologically innovative industrial equipment so as not to lower the bar.
To ask a question or book, phone us or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Pilot | Internal |
Sealing principle | Soft sealing |
Blocking principle | Base plate principle, multiple |
Connection type | Plate connection |
Standards | ISO 15407-1, 18 mm |
Connector standard | ISO 15217 |
Working pressure min./max. | 2,2 ... 10 bar |
Control pressure min./max. | 2,2 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 60 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | See table |
Protection class with connection | IP65 |
Duty cycle | 100 % |
Typ. switch-on time | See table |
Typ. switch-off time | See table |
Mounting screw | M3 |
Weight | 0,17 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Housing | Aluminum, anodized |
Seals | Acrylonitrile butadiene rubber Hydrogenated acrylonitrile butadiene rubber |
Front plate | Polyamide |