We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637907
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 100 mm |
Piston rod thread | M20 |
Standardization | ISO 15524 |
Stroke | 25 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Polyurethane |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R480637907, catch up with FAMAGA, the world's main provider of streamlined equipment. Our company has existed for more than ten years - these are years of experience, which are illustrated in the quality of products and personalseparate attention to each buyer. We cherish everyone, who collaborated with us - so, our regular purchasers obtain the most flexible purchase conditions and discounts on the machine made streamlined equipment market. Nowadays, there are more than 4500 such clients, and we constantly form new agreements. More than 650 transactions are made per day, because FAMAGA delivers all over the world Germany, United Kingdom, France, Yemen, Moldova, Chile, Kiribati, Portugal, Costa Rica, Egypt, Lebanon, Turkmenistan, Palestine, Pakistan, Mozambique, North Korea, Macedonia, Uruguay, Japan, Uganda, Kenya, Armenia, Ukraine, Kyrgyzstan, Tonga, China, Uzbekistan, Cyprus, Sierra Leone, Denmark, Algeria, Thailand, Syria, Mongolia, Montenegro, Argentina, Rwanda, Cameroon, Sudan, Philippines, Hungary, Serbia, Lithuania, Ghana. A well-developed logistics chains and a partnership network help us to conduct our products anywhere in the world as soon as possible without discrediting product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the field of factory-made equipment.
All merchandises from FAMAGA are ensured - we are responsible for the cause of our work. Now, more than 10 million units of products have been provided, and this amount is growing every day. We are proud that customers choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as to stay on the top.
To ask a question or order, phone us or send a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note the selection of fittings for strokes < 10 mm . |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |