We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412006226
Description
Parts | Standard oil-mist lubricator |
Type of filling | Semi-automatic oil filling during operation,Manual oil filling |
Protective guard | with protective guard |
Housing | Polyamide |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 2800 l/min |
Compressed air connection | G 1/4 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412006226, contact FAMAGA, the world's major retailer of factory-made equipment. Our company has advanced for more than ten years - these are years of experience, which are described in the quality of merchandises and private attention to each consumer. We understand everyone, who liased with us - therefore, our regular buyers accept the most desirable purchase terms and discounts on the machine made streamlined equipment market. At this time, there are more than 4000 such buyers, and we constantly form new agreements. More than 650 purchases are terminated per day, because FAMAGA delivers all over the world Germany, United Kingdom, Bahamas, France, Thailand, Tonga, Belarus, Libya, Finland, Bhutan, Netherlands, Malta, Cape Verde, Chad, Oman, Rwanda, United States, Yemen, Slovakia, Mauritius, Mexico, Malawi, Dominica, Macedonia, Armenia, Bosnia and Herzegovina, Ecuador, The Gambia, North Korea, Croatia, Zimbabwe, Niger, Brazil, Bangladesh, Austria, Mongolia, Kenya, Pakistan, Equatorial Guinea, Brunei, New Zealand, Switzerland. A well-built logistics bond and a partnership network guide us to send our units anywhere in the world quickly without damaging product quality.
A specific source of dignity for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only experts, who already have experience in the field of machine made streamlined equipment.
All products from FAMAGA are assured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that users choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To ask a question or place an order, call us by phone or send a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Oil-mist lubricator, Can be assembled into blocks |
Parts | Standard oil-mist lubricator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 0,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Lubricator reservoir volume | 40 cm³ |
Type of filling | Semi-automatic oil filling during operation Manual oil filling |
Weight | 0,229 kg |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Electrical level detection only with ST6 sensor with reed contact, sensor holder included in the scope of the delivery. Sensor not included in scope of delivery, sensor installation prepared. The entire preset drip quantity enters the pressure system. Manual oil filling possible during operation at a maximum operating pressure of 10 bar. Suitable for use in Ex zones 1, 2, 21, 22. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. | |
Oil dosing at 1000 l/min | 1-2 drops |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Polyamide |