We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
дюйм - R480176865
Description
Functional principle | double-acting |
Cushioning | pneumatically,pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | 1/2-20 UNF |
Stroke | 50.8 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | 1/4 NPT |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) дюйм - R480176865, call FAMAGA, the world's major supplier of industrialized equipment. Our company has operated for more than ten years - these are cycles of experience, which are depicted in the quality of products and individual attention to each client. We praise everyone, who worked with us - so, our regular buyers get the most helpful purchase conditions and discounts on the industrial equipment market. Nowadays, there are more than 4000 such consumers, and we constantly compose new agreements. More than 600 transactions are made per day, because FAMAGA works all over the world Germany, United Kingdom, Mauritius, Oman, Bangladesh, Swaziland, Mauritania, Greece, Kiribati, Dominican Republic, Jamaica, Papua New Guinea, Egypt, Canada, Georgia, Sweden, Ecuador, Monaco, Uruguay, Afghanistan, Tunisia, United Arab Emirates, Malawi, Vietnam, Cameroon, Seychelles, Kazakhstan, Malaysia, Cyprus, United States, Hungary, Estonia, Burkina Faso, Togo, Lithuania, Fiji, Bosnia and Herzegovina, Albania, Panama, Serbia, Uganda, Yemen, Zimbabwe, Guatemala, Iceland, Botswana, Kuwait. A well-built logistics chains and a partnership network allow us to send our goods anywhere in the planet on-time without undermining product quality.
A specific source of pride for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only professionals, who already have experience in the sphere of factory-made equipment.
All products from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that customers choose FAMAGA again and again, and we strive to make more developed and technologically developed industrial equipment so as stay in control.
To consult or place an order, call us by phone or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |