We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820039261
Description
Standardization | ISO 15407-1 |
Frame size | 18 mm |
Switching principle | 5/3 |
Version | Spool valve, positive overlapping |
Housing | Aluminum |
Sealing material | Acrylonitrile butadiene rubber,Hydrogenated acrylonitrile butadiene rubber |
Connector standard | ISO 15217 |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 250 l/min |
Compressed air connection input | VDMA 02 base plate |
Compressed air connection output | VDMA 02 base plate |
DC operating voltage | 24 V |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0820039261, reach FAMAGA, the world's the best distributor of streamlined equipment. Our company has advanced for more than ten years - these are years of experience, which are illustrated in the quality of outputs and personalseparate attention to each user. We admire everyone, who liased with us - therefore, our regular consumers procure the most favorable purchase conditions and discounts on the manufacturing equipment market. Now, there are more than 4000 such consumers, and we constantly form new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Bosnia and Herzegovina, Chad, Zimbabwe, Uruguay, Kyrgyzstan, Ireland, Serbia, Belgium, Andorra, Guinea, Rwanda, Saudi Arabia, Tonga, Equatorial Guinea, Azerbaijan, Mauritius, Senegal, Qatar, Macedonia, The Bahamas, Kiribati, Cyprus, Ghana, Yemen, Tanzania, Kenya, Chile, Seychelles, Zambia, Libya, Nigeria, United States, Jordan, Namibia, Ukraine, Greece, Haiti, New Zealand, Georgia, Israel, Samoa, Niger, Central African Republic. A well-elaborated logistics connection and a partnership network cheer us to deliver our goods anywhere in the earth with no delay without discrediting product quality.
A special source of pride for FAMAGA is its employees, each of whom contributes to our work. We call into our team only specialists, who already have experience in the field of factory-made equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this number is ascending every day. We are glad that consumers choose FAMAGA again and again, and we are eager to make more progressive and technologically innovative industrial equipment so as not to lower the bar.
To get some advice or make a request, call us by phone or write to the online chat on our site. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Sealing principle | Soft sealing |
Blocking principle | Base plate principle, multiple |
Connection type | Plate connection |
Standards | ISO 15407-1, 18 mm |
Connector standard | ISO 15217 |
Working pressure min./max. | 2,2 ... 10 bar |
Control pressure min./max. | 2,2 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 60 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | See table |
Protection class with connection | IP65 |
Protection class Without valve plug connector | See table |
Duty cycle | 100 % |
Typ. switch-on time | See table |
Typ. switch-off time | See table |
Mounting screw | M3 |
Weight | 0,17 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Housing | Aluminum, anodized |
Seals | Acrylonitrile butadiene rubber Hydrogenated acrylonitrile butadiene rubber Acrylonitrile butadiene rubber |
Front plate | Polyamide |
Threaded bushing | Aluminum |