We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822496300
Description
Piston rod modification | Optionally heat-resistant |
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M12x1,25 |
Standardization | NFE 49004 |
Stroke | 5 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822496300, catch up with FAMAGA, the world's leading vendor of industrialized equipment. Our company has functioned for more than ten years - these are ages of experience, which are illustrated in the quality of outcomes and private attention to each purchaser. We praise everyone, who joined with us - therefore, our regular clients accept the most favorable purchase forms and discounts on the machine made streamlined equipment market. Today, there are more than 4000 such clients, and we constantly compose new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Gambia, Côte d\'Ivoire, Uganda, Libya, Egypt, Albania, Burma, Eswatini, Grenada, Czech Republic, Liberia, Denmark, Iraq, Belize, Haiti, Thailand, Panama, India, Nicaragua, Armenia, United Arab Emirates, Bulgaria, Kuwait, Kenya, Macedonia, Israel, Mexico, Greece, Austria, Mongolia, Guatemala, Tunisia, Moldova, Kiribati, Namibia, Tajikistan, Central African Republic, Philippines, Kyrgyzstan, Botswana, Chile, Bangladesh. A well-shaped logistics bond and a partnership network cheer us to dispatch our goods anywhere in the globe on-time without damaging product quality.
A specific source of good name for FAMAGA is its team members, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are verified - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this number is increasing every day. We are happy that purchasers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To inquire or order, call us by phone or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |