We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412000401
Description
Adjustable angle of rotation max. | 180 ° |
Adjustable angle of rotation min. | 0 ° |
Frame size | RCM-20 |
Version | double piston with rack |
Cushioning | hydraulic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Housing | Aluminum |
Sealing material | Acrylonitrile butadiene rubber |
Compressed air connection | M5 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412000401, reach FAMAGA, the world's influential provider of industrial equipment. Our company has functioned for more than ten years - these are cycles of experience, which are illustrated in the quality of outputs and private attention to each buyer. We admire everyone, who joined with us - therefore, our regular buyers receive the most desirable purchase forms and discounts on the manufacturing equipment market. Today, there are more than 4000 such buyers, and we constantly compose new agreements. More than 700 proceedings are resolved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Greece, Monaco, Belize, Honduras, Portugal, Burma, Syria, India, Kazakhstan, Iceland, Romania, Lithuania, Austria, Norway, Qatar, Niger, Macedonia, Afghanistan, Iran, Australia, Latvia, Denmark, Guyana, Bulgaria, Gambia, Turkey, Russia, Equatorial Guinea, Malaysia, Central African Republic, Azerbaijan, Israel, Bosnia and Herzegovina, Thailand, Iraq, Brazil, Zambia, Poland, Andorra, Haiti, Malta, Benin. A well-developed logistics system and a partnership network help us to dispatch our units anywhere in the earth on-time without compromising product quality.
A particular source of good name for FAMAGA is its team members, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the field of factory-made equipment.
All products from FAMAGA are verified - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been supplied, and this number is rising every day. We are glad that consumers choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To ask a question or make a request, contact us or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Working pressure min./max. | 4 ... 8 bar |
Ambient temperature min./max. | 5 ... 60 °C |
Medium temperature min./max. | 5 ... 60 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Cushioning | hydraulic non-adjustable |
Theoretical torque at | 6 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
NOTICE:For positioning without overswing in the intermediate position, it is recommended to limit the mass moment of inertia to 40% of the maximum permissible value! |
Material |
---|
Housing | Aluminum, anodized |
Cap | Aluminum, black anodized |
Base | Aluminum, black anodized |
Seal | Acrylonitrile butadiene rubber |
Axis | Steel, hardened |
Rotary flange | Steel, hardened |