We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820059121
Description
Actuating control | double solenoid |
Switching principle | 5/3 |
Version | Spool valve, positive overlapping |
Housing | Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber,Hydrogenated nitrile butadiene rubber |
Connector standard | ISO 15217 |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 1300 l/min |
Compressed air connection input | G 1/4 |
Compressed air connection output | G 1/4 |
DC operating voltage | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0820059121, reach FAMAGA, the world's foremost retailer of mechanized equipment. Our company has lasted for more than ten years - these are ages of experience, which are illustrated in the quality of outputs and individual attention to each customer. We admire everyone, who worked with us - therefore, our regular customers bring in the most convenient purchase conditions and discounts on the manufacturing equipment market. Now, there are more than 4000 such customers, and we constantly arrange new agreements. More than 650 purchases are terminated per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Moldova, Fiji, Tunisia, Romania, Malawi, Haiti, Mongolia, Senegal, Lithuania, Monaco, Palestine, Argentina, Bulgaria, Kiribati, Vietnam, Israel, Nigeria, Brunei, Central African Republic, Uganda, Yemen, Kenya, Russia, Iran, Azerbaijan, New Zealand, Georgia, Bosnia and Herzegovina, United Arab Emirates, Equatorial Guinea, Libya, Jordan, Uruguay, Burundi, Hungary, Namibia, Mexico, Norway, Antigua and Barbuda, Denmark, Egypt. A advanced logistics link and a partnership network assist us to conduct our elements anywhere in the earth with no delay without undermining product quality.
A specific source of repute for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the field of factory-made equipment.
All merchandises from FAMAGA are ensured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been provided, and this number is growing every day. We are glad that consumers choose FAMAGA again and again, and we are glad to make more progressive and technologically advanced industrial equipment so as not to lower the bar.
To consult or make a request, call us by phone or write to the online chat on our site. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Sealing principle | Soft sealing |
Working pressure min./max. | See table |
Control pressure min./max. | 3 ... 10 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 1300 l/min |
Connector standard | ISO 15217 |
Protection class with connection | IP65 |
Duty cycle | 100 % |
Typ. switch-on time | 12 ms |
Typ. switch-off time | 13 ms |
Mounting on manifold strip | P-strip |
Mounting screw tightening torque | 2,5 Nm |
Weight | 0,278 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber Hydrogenated nitrile butadiene rubber |
Front plate | Polyamide fiber-glass reinforced |
Threaded bushing | Brass Die cast zinc, nickel-plated chrome-plated |