We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001346
Description
Piston rod modification | non-rotating, with front plate |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M8 |
Standardization | ISO 21287 |
Stroke | 60 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R422001346, contact FAMAGA, the world's prime vendor of manufacturing equipment. Our company has lasted for more than ten years - these are cycles of experience, which are described in the quality of merchandises and particular attention to each orderer. We praise everyone, who joined with us - hence, our regular consumers obtain the most desirable purchase forms and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such purchasers, and we constantly sign new agreements. More than 650 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Kyrgyzstan, Lesotho, Philippines, Tanzania, Fiji, Palestine, Moldova, Uganda, Slovakia, Bhutan, Angola, Saudi Arabia, Rwanda, Central African Republic, Lithuania, Luxembourg, Ghana, Namibia, Dominica, Bosnia and Herzegovina, Malawi, Syria, Mongolia, Uzbekistan, Malaysia, Equatorial Guinea, Malta, Iraq, United Arab Emirates, Azerbaijan, Antigua and Barbuda, Estonia, Belize, Turkey, Denmark, Sierra Leone, Andorra, Kazakhstan, Israel, Kuwait, Iceland, Eswatini, India, Comoros. A well-shaped logistics network and a partnership network guide us to ship our products anywhere in the world promptly without undermining product quality.
A particular source of repute for FAMAGA is its staff members, each of whom contributes to our work. We call into our team only specialists, who already have experience in the field of industrial equipment.
All outputs from FAMAGA are verified - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been supplied, and this amount is rising every day. We are proud that purchasers choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To inquire or order, get in touch with us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Front plate | Aluminum |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |