We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820037053
Description
Switching principle | 2x3/2 |
Version | Spool valve, positive overlapping |
Housing | Aluminum |
Sealing material | Hydrogenated acrylonitrile butadiene rubber |
Connector standard | ISO 15217 |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 600 l/min |
Compressed air connection input | G 1/8 |
Compressed air connection output | G 1/8 |
Operational voltage AC at 50 Hz | 24 V |
Operational voltage AC at 60 Hz | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0820037053, catch up with FAMAGA, the world's primary company of factory-made equipment. Our company has worked for more than ten years - these are years of experience, which are outlined in the quality of products and individual attention to each consumer. We understand everyone, who cooperated with us - so, our regular consumers pick up the most beneficial purchase conditions and discounts on the machine made streamlined equipment market. Now, there are more than 4500 such clients, and we constantly form new agreements. More than 650 transactions are made per day, because FAMAGA works all over the earth Germany, United Kingdom, Libya, Congo, Malaysia, Kenya, Lebanon, Niger, Sudan, Hungary, Georgia, Liberia, Czech Republic, Bangladesh, Mali, Peru, Bulgaria, Moldova, East Timor, Malawi, Chad, Mauritius, Zambia, Liechtenstein, Cyprus, Iraq, Tonga, Bosnia and Herzegovina, Switzerland, Belize, Cameroon, Serbia, Jordan, Iran, Tanzania, Russia, Eswatini, Montenegro, Kyrgyzstan, Morocco, Laos, Norway, Nigeria, Afghanistan. A advanced logistics bond and a partnership network allow us to deliver our products anywhere in the earth immediately without compromising product quality.
A special source of pride for FAMAGA is its employees, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the field of factory-made equipment.
All goods from FAMAGA are verified - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this bulk is growing every day. We are glad that clients choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as to stay on the top.
To get some advice or order, phone us or write to the online chat on our official website. You can also direct a list of the needful equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Pilot | Internal |
Sealing principle | Soft sealing |
Working pressure min./max. | 2,2 ... 10 bar |
Control pressure min./max. | 2,2 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 60 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 600 l/min |
Connector standard | ISO 15217 |
Protection class with connection | IP65 |
Duty cycle | 100 % |
Typ. switch-on time | 12 ms |
Typ. switch-off time | 24 ms |
Mounting on manifold strip | PRS strip |
mounting screws | M3 |
Weight | 0,16 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Aluminum, anodized |
Seals | Hydrogenated acrylonitrile butadiene rubber |
Front plate | Polyamide |
Threaded bushing | Aluminum |