We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480060010
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 15552 |
Stroke | 250 mm |
Scraper | Polyester |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480060010, reach FAMAGA, the world's prime company of factory-made equipment. Our company has existed for more than ten years - these are cycles of experience, which are portrayed in the quality of products and individual attention to each consumer. We understand everyone, who engaged with us - hence, our regular consumers pick up the most desirable purchase forms and discounts on the machine made streamlined equipment market. Now, there are more than 4000 such clients, and we constantly form new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Côte d\'Ivoire, Guyana, Italy, East Timor, Cambodia, Nepal, Central African Republic, United Arab Emirates, Iran, Palestine, Uganda, Serbia, Libya, Czech Republic, Rwanda, Botswana, Sudan, Chad, Liechtenstein, Netherlands, Mauritania, Tonga, Mongolia, Albania, Denmark, Niger, Nigeria, Mexico, Namibia, Seychelles, Macedonia, Ghana, Slovakia, Bulgaria, Armenia, Kenya, United States, Antigua and Barbuda, Syria, Tunisia, Benin. A advanced logistics bond and a partnership network let us to conduct our products anywhere in the world promptly without compromising product quality.
A particular source of good name for FAMAGA is its team members, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the field of factory-made equipment.
All outcomes from FAMAGA are verified - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are proud that purchasers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as keep on top of it.
To get some advice or book, contact us or write a message to the online chat on our official website. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Ø25 not according to ISO 15552 The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is PTFE. |
Further options can be generated in the Internet configurator. ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. Ø25 not according to ISO 15552 |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Scraper | Polyester |
Tie-rods | Stainless steel |