We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480627388
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 200 mm |
Piston rod thread | M36x2 |
Standardization | ISO 15552 |
Stroke | 400 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 3/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480627388, contact FAMAGA, the world's prime company of machine made equipment. Our company has advanced for more than ten years - these are cycles of experience, which are expressed in the quality of merchandises and personalseparate attention to each user. We appreciate everyone, who conspired with us - hence, our regular customers bring in the most desirable purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such buyers, and we constantly sign new agreements. More than 750 purchases are terminated per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Denmark, Liberia, Netherlands, Italy, Slovenia, Greece, Papua New Guinea, Fiji, Singapore, Israel, Dominica, Sweden, Morocco, Austria, Liechtenstein, Croatia, United Arab Emirates, Malta, Turkey, Peru, South Korea, Kyrgyzstan, Finland, Brunei, Belarus, Bangladesh, Afghanistan, Central African Republic, Ireland, Costa Rica, Yemen, Zimbabwe, Mauritania, Benin, Ghana, China, Cyprus, Cape Verde, Kazakhstan. A well-elaborated logistics system and a partnership network guide us to send our items anywhere in the world immediately without compromising product quality.
A specific source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the field of industrial equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that consumers choose FAMAGA again and again, and we are eager to make more progressive and technologically advanced industrial equipment so as stay in control.
To inquire or place an order, call us by phone or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel |