We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R404065638
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 200 mm |
Sealing material | Acrylonitrile butadiene rubber |
Scraper | Polyurethane |
Corrosion resistance | corrosion-resistant |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R404065638, connect FAMAGA, the world's chief provider of industrial equipment. Our company has worked for more than ten years - these are cycles of experience, which are expressed in the quality of goods and particular attention to each purchaser. We cherish everyone, who collaborated with us - so, our regular buyers pick up the most favorable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4500 such buyers, and we constantly form new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Denmark, Bolivia, Croatia, Panama, Belize, Nicaragua, The Gambia, Honduras, Seychelles, South Korea, Austria, Laos, Nepal, Vietnam, Samoa, Poland, Georgia, Netherlands, Guyana, Armenia, Cyprus, Burkina Faso, Uruguay, Latvia, Ecuador, Angola, Indonesia, Morocco, Estonia, Norway, Ireland, Tonga, Malaysia, Botswana, Philippines, Jordan, Togo, Madagascar. A well-shaped logistics connection and a partnership network help us to send our elements anywhere in the globe promptly without undermining product quality.
A special source of repute for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been provided, and this bulk is growing every day. We are pleased that purchasers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To request or book, phone us or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 70 °C |
Medium temperature min./max. | -20 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Nut MR3 included in supply |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Front cover | Polyoxymethylene |
End cover | Polyoxymethylene |
Connection thread | Stainless steel |
Seal | Acrylonitrile butadiene rubber |
Nut for cylinder mounting | Polyamide |
Nut for piston rod | Stainless steel |
Scraper | Polyurethane |