We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822495304
Description
Piston rod modification | Optionally heat-resistant |
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M12x1,25 |
Standardization | NFE 49004 |
Stroke | 25 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822495304, make contact with FAMAGA, the world's main retailer of factory-made equipment. Our company has progressed for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and private attention to each purchaser. We cherish everyone, who worked with us - thus, our regular customers obtain the most flexible purchase conditions and discounts on the factory-made equipment market. Now, there are more than 4500 such consumers, and we constantly form new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Panama, Ukraine, North Korea, Eswatini, El Salvador, Liechtenstein, Antigua and Barbuda, Burma, Libya, Rwanda, Afghanistan, Albania, Australia, Norway, Greece, Kyrgyzstan, Tunisia, Chad, Turkmenistan, Estonia, Denmark, Israel, Sweden, Ghana, Russia, Jordan, Bulgaria, New Zealand, Nigeria, Switzerland, Brazil, Qatar, Tonga, Namibia, Malta, The Gambia, Macedonia, Montenegro. A well-shaped logistics bond and a partnership network allow us to deliver our items anywhere in the globe as soon as possible without discrediting product quality.
A specific source of dignity for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the range of manufacturing equipment.
All merchandises from FAMAGA are verified - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are happy that buyers choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To ask a question or book, phone us or send a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |