We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822495104
Description
| Piston rod modification | Optionally heat-resistant |
| Functional principle | Single-acting, extended without pressure |
| Cushioning | elastic |
| Magnetic piston | with magnetic piston |
| Piston diameter | 50 mm |
| Piston rod thread | M10 |
| Standardization | NFE 49004 |
| Stroke | 25 mm |
| Sealing material | Polyurethane |
| Scraper | Polyurethane |
| Compressed air connection | G 1/8 |
| Compressed air connection type | Internal thread |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are pursuing Aventics (brand of Emerson) 0822495104, connect FAMAGA, the world's principle vendor of industrial equipment. Our company has lasted for more than ten years - these are cycles of experience, which are illustrated in the quality of products and personalseparate attention to each orderer. We esteem everyone, who cooperated with us - therefore, our regular purchasers receive the most favorable purchase terms and discounts on the factory-made equipment market. Nowadays, there are more than 4 thousand such customers, and we constantly arrange new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the planet Germany, United Kingdom, Eswatini, Togo, Malaysia, United Arab Emirates, Burundi, Fiji, Georgia, Canada, Comoros, Poland, Kazakhstan, Zambia, Morocco, Switzerland, Pakistan, Mozambique, Jamaica, Japan, Nicaragua, Nigeria, Panama, South Korea, Central African Republic, Madagascar, Belize, The Gambia, Brunei, Suriname, Luxembourg, Kenya, Guatemala, Andorra, Qatar, Benin, Croatia, Antigua and Barbuda, Djibouti, Indonesia. A well-elaborated logistics system and a partnership network guide us to ship our units anywhere in the world on-time without disreputing product quality.
A particular source of pride for FAMAGA is its employees, each of whom contributes to our work. We call into our team only experts, who already have experience in the field of manufacturing equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this number is growing every day. We are happy that clients choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as stay in control.
To inquire or place an order, phone us or write a message to the online chat on our site. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Standards | NFE 49004 |
| Compressed air connection | Internal thread |
| Ambient temperature min./max. | -20 ... 80 °C |
| Medium temperature min./max. | -20 ... 80 °C |
| Medium | Compressed air |
| Max. particle size | 5 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Aluminum |
| End cover | Aluminum |
| Seal | Nitrile butadiene rubber Polyurethane |
| Scraper | Polyurethane |
