We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001316
Description
Piston rod modification | non-rotating, with front plate |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M8 |
Standardization | ISO 21287 |
Stroke | 30 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R422001316, get in touch with FAMAGA, the world's dominant distributor of factory-made equipment. Our company has functioned for more than ten years - these are ages of experience, which are expressed in the quality of goods and personalseparate attention to each client. We esteem everyone, who conspired with us - so, our regular clients procure the most favorable purchase terms and discounts on the industrial equipment market. At this time, there are more than 4 thousand such customers, and we constantly arrange new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Tanzania, Djibouti, Qatar, Vietnam, Jordan, South Sudan, Jamaica, Oman, Mexico, Mozambique, Ghana, Lithuania, Suriname, Bolivia, Botswana, Seychelles, Philippines, Monaco, Fiji, Iceland, United Arab Emirates, Poland, Uganda, Indonesia, Burundi, Georgia, Yemen, Sweden, Serbia, Ukraine, Egypt, Denmark, Cyprus, United States, Malaysia, Tunisia, China, Brunei. A well-developed logistics system and a partnership network assist us to deliver our elements anywhere in the globe on-time without discrediting product quality.
A specific source of pride for FAMAGA is its personnel, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the range of factory-made equipment.
All merchandises from FAMAGA are ensured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been delivered, and this quantity is amounting every day. We are pleased that consumers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as stay in control.
To request or make a request, phone us or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Front plate | Aluminum |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |